AMP Ltd. is an innovative company created upon a solid framework of experienced engineering and sales personnel. Since its establishment the company has been focused on manufacturing equipment for heat and surface treatment of metals as well as PVD and CVD technologies. Our product range incorporates furnaces and equipment for the following applications: vacuum furnaces, atmospheric furnaces, atmosphere generators, furnaces for thermo-chemical treatment, industrial washers using eco-friendly washing agents. Our equipment can be applied in the following technologies: sintering, brazing, hardening, tempering, annealing, degassing and dehydrogenation and washing and degreasing.

Euro-Equip – European producer of runner breakers based on license of famous Japanese company YUATSUKI which is the precursor and global leading provider of this type of equipment.
Euro-Equip offers also furnace charge preparation systems, iron nodularization and automatic inoculation system.

Exclusive representative of EURO-EQUIP in Poland:

FOUNDRY PARTNER Piotr Jankowski

Ul. Lipowa 6

32-082 Zelków

Polska

Tel. +48 12 378 40 43

Tel. kom. +48 507 024 183

Email: piotr.jankowski@foundrypartner.pl

Email: biuro@foundrypartner.pl

FOUNDRY PARTNER Piotr Jankowski

Exclusive representative in Poland of famous and world well known foundry equipment suppliers:

DISA Industries A/S – world’s leading supplier of foundry equipment. It offers vertical flaskless moulding lines DISAMATIC type, horizontal flaskless moulding lines DISA MATCH type, sand turbine mixers, cooling drums and lots of other equipment.

Wheelabrator – international leading supplier of shot blasting equipment. The Wheelabrator machines are highest and proven quality and are installed in the best foundries worldwide. The range of available shot blasting machines begins from relatively simple machines for small foundries, machines for middle-sized foundries, up to high-tech and high-capacity equipment, designed
for special application.

Euro-Equip – European producer of runner breakers based on license of famous Japanese company YUATSUKI which is the precursor and global leading provider of this type of equipment.
Euro-Equip offers also furnace charge preparation systems, iron nodularization and automatic inoculation system.

Inspectomation – A German-based company which delivers quality control systems for castings, cores and sand moulds. The solutions cooperate with the facilities installed in foundries, for example
with DISAMATIC moulding lines.

*Refractories for all kinds of furnaces and equipments *Gunning machines and injection machines of bulk materials *Pneumatic jolting machines for coreless furnaces *Separate means, auxiliaries and protective coatings *Stainless steel shot and grit Chronital, Grittal *Steel, aluminium and zinc cut wire *Low carbons steel shot *Materials  for insulation and sealing *Protective clothes for foundry workers  *Slagging Agent *Cored wire for spheroidization *Moulding sand management system *Induction furnaces, foundry-ladles, reparation and maintenance of induction furnaces  

INDUCTION HEATING SYSTEMS

Termetal company offers a wide range of induction heating systems that can be used in metal industry.

Melting

-         induction coreless furnacess for melting cast iron, cast steel and non-ferrous metals

-         power supplies 5kW - 4000kW

-         crucible capacity 1kg - 6000kg

-         computer control melting system

-         delivery, installation, start-up and personnel training

-         cooling systems

Heating before hot forming

-         induction heaters with fully automatic feeding and transport systems before forging

-         continuous induction heating systems for long parts like bars, tubes or sheets for the process of forging, annealing, tempering, drying

-         bars ends and tubes ends induction heating systems

-         heating of steel, austenitic steel, copper, brass, aluminium, graphite and others

-         heating of billets, bars, tubes, pipes, flat bars, sheets, wires

-         power supplies 3kW - 4000kW

Heat treatment

-         vertical and horizontal induction hardening systems

-         CNC or PLC control systems

-         frequency converters power 30kW - 500kW, frequency 500Hz - 500kHz

-         hardening and tempering process control and monitoring for each part

-         automatic parts loading and unloading systems

-         integrated induction tempering systems

Welding

-         induction welding of pipes, tubes and profiles

-         HF frequency converters power 30kW - 150kW, frequency 200kHz - 500kHz

Brazing

-         manual, semi-automatic and fully automatic induction brazing systems

-         brazing of steel, copper, brass, aluminium etc.

-         brazing carbides, tubes, flat bars and other parts

Frequency converters

-         IGBT MF frequency converters power 3kW - 600kW

-         MOSFET HF frequency converters power 2kW - 150kW

-         Thyristor frequency converters power 100kW - 4000kW

-         our own converters contruction and uP control system solutions

-         easy integration to production lines

-         converters service

-         spare parts

Complete production lines

-         project, delivery, installation and start-up of complete production lines

-         technology research, development and implementation

Service

-         heating and hardening inductors design, manufacture and rapairs

-         coreless and channel furnaces coils repairs

-         induction systems repairs, modernizations

-         project and modernization of cooling systems

-         frequency converters service (all producers)

-        spare parts

FOUNDRY PARTNER Piotr Jankowski

Exclusive representative in Poland of famous and world well known foundry equipment suppliers:

DISA Industries A/S – world’s leading supplier of foundry equipment. It offers vertical flaskless moulding lines DISAMATIC type, horizontal flaskless moulding lines DISA MATCH type, sand turbine mixers, cooling drums and lots of other equipment.

Wheelabrator – international leading supplier of shot blasting equipment. The Wheelabrator machines are highest and proven quality and are installed in the best foundries worldwide. The range of available shot blasting machines begins from relatively simple machines for small foundries, machines for middle-sized foundries, up to high-tech and high-capacity equipment, designed
for special application.

Euro-Equip – European producer of runner breakers based on license of famous Japanese company YUATSUKI which is the precursor and global leading provider of this type of equipment.
Euro-Equip offers also furnace charge preparation systems, iron nodularization and automatic inoculation system.

Inspectomation – A German-based company which delivers quality control systems for castings, cores and sand moulds. The solutions cooperate with the facilities installed in foundries, for example
with DISAMATIC moulding lines.

Since 1992 the company PROMET CZECH s.r.o. is one of the leading suppliers of raw materials for foundries and steel mills in Central Europe.
 We supply
- Hematite, Nodular and Steelmaking Pig Iron of different chemical composition,
- Ferroalloys FeS, FeSi, FeMnHC, FeSiMn, FeMnLC, FeCrHC, FeCrLC,
- Noble alloys FeMo, FeV, FeTi, FeNb,
- Metals Fe, Ni, Cu, Pb,
- Iron and steel scrap

 DISA is 100 years old international leading company operated on foundry market. DISA is well known as asupplier of highest quality, reliable and long living equipment.
The range of DISA products is following:

● flaskless vertical moulding lines DISAMATIC type, which are proved in technologically demanding foundry processes,

● flaskless horizontal moulding lines DISA MATCH type,

● core shooters,
● turbine mixers,
● sand plants,
● technical support,
● complex engineering support,

and,
● spare and wear parts stock with lots of them.

Exclusive representative of DISA in Poland:

FOUNDRY PARTNER Piotr Jankowski

Ul. Lipowa 6

32-082 Zelków

Polska

Tel. +48 12 378 40 43

Tel. kom. +48 507 024 183

Email: piotr.jankowski@foundrypartner.pl

Email: biuro@foundrypartner.pl

Founded  in 1992 , Eurotek Foundry Products Ltd , has developed and produced a wide range of
Foundry consumables to an ever expanding customer base worldwide.
From its well established No Bake products such as PERMASET  and PERMABIND to the
environmentally friendly ENVIROCOL system , Eurotek has continually strived to offer our customers
solutions to the problems facing a changing Foundry Industry.
The cornerstone of our Business has been a focus on customer needs and service and whilst Eurotek
operate in many countries , no where is this principle demonstrated better than in POLAND.
Having been active on the Polish market for 14 years , with its own dedicated Sales and Servicing
team , Eurotek's range of products encompasses all No Bake binder systems along with Urethane
cold box binders and a growing list of ancillary consumables such as Refractory Coatings , Resin
Coated Sand , Release agents , glues and Foundry Equipment such as mixers and reclamation plant.
Eurotek has also established a number of working partners in Poland , including
SAND TEAM, Eurocast Industries and Termit in order to facility customer support.
From Concept to Castings/ Od Koncepcji do Odlewu
For Further info/ Dalsze informacje :     www.eurotek.eu.com. Tel No (0044) 1422 375550
Ł. Tarnwaski.  (0048) 728 357 657

FOUNDRY PARTNER Piotr Jankowski

Exclusive representative in Poland of famous and world well known foundry equipment suppliers:

DISA Industries A/S – world’s leading supplier of foundry equipment. It offers vertical flaskless moulding lines DISAMATIC type, horizontal flaskless moulding lines DISA MATCH type, sand turbine mixers, cooling drums and lots of other equipment.

Wheelabrator – international leading supplier of shot blasting equipment. The Wheelabrator machines are highest and proven quality and are installed in the best foundries worldwide. The range of available shot blasting machines begins from relatively simple machines for small foundries, machines for middle-sized foundries, up to high-tech and high-capacity equipment, designed
for special application.

Euro-Equip – European producer of runner breakers based on license of famous Japanese company YUATSUKI which is the precursor and global leading provider of this type of equipment.
Euro-Equip offers also furnace charge preparation systems, iron nodularization and automatic inoculation system.

Inspectomation – A German-based company which delivers quality control systems for castings, cores and sand moulds. The solutions cooperate with the facilities installed in foundries, for example
with DISAMATIC moulding lines.

MOTUL TECH BARALDI

Founded in 1917, Baraldi has been developing and producing diecasting lubricants and release agents since the 70s.

The company operates on an area of approx. 3000 square meters, assuring an extremely efficient and flexible production.

In 2006 Baraldi became partner of MotulTech, to share know-how, market strategies and to develop national and international activities.

Today Baraldi represents the reference for HPDC lubricants within the Group MOTUL.

An avant-garde quality control, research and development laboratory is the strength of MOTUL Tech Baraldi.
Our Mission is to be a partner of our Customers to overcome the challenges that the market offers, seeking complete solutions, including alternatives,

that create Value for All stakeholders involved, safeguarding the Economic, Social and Environmental interest.

In our Vision we seek the Excellence, day after day, in the products, services and in the research of solutions with a lean and customer-oriented approach.

We have developed the project "Aluminium Way", a useful tool to assist customers engaged in the daily production of Aluminum parts,
proposing solutions through "Products, Services and Training" side by side in all stages of production.

Founded  in 1992 , Eurotek Foundry Products Ltd , has developed and produced a wide range of
Foundry consumables to an ever expanding customer base worldwide.
From its well established No Bake products such as PERMASET  and PERMABIND to the
environmentally friendly ENVIROCOL system , Eurotek has continually strived to offer our customers
solutions to the problems facing a changing Foundry Industry.
The cornerstone of our Business has been a focus on customer needs and service and whilst Eurotek
operate in many countries , no where is this principle demonstrated better than in POLAND.
Having been active on the Polish market for 14 years , with its own dedicated Sales and Servicing
team , Eurotek's range of products encompasses all No Bake binder systems along with Urethane
cold box binders and a growing list of ancillary consumables such as Refractory Coatings , Resin
Coated Sand , Release agents , glues and Foundry Equipment such as mixers and reclamation plant.
Eurotek has also established a number of working partners in Poland , including
SAND TEAM, Eurocast Industries and Termit in order to facility customer support.
From Concept to Castings/ Od Koncepcji do Odlewu
For Further info/ Dalsze informacje :     www.eurotek.eu.com. Tel No (0044) 1422 375550
Ł. Tarnwaski.  (0048) 728 357 657

This exhibitor is co-exhibitor of:

PLASTMET - Poland

Our main activity on Polish territory, is activity of agents of Italian companies, designers and producers of foundry equipment, like:

• BelloiRomagnoli S.r.l. - ladles, automatic moulding plants, green sand reclamation and preparation plants
• Primafond S.r.l. - core-shooters machines, sand preparation plants, equipment and complete core-shop plants
• Centauro S.p.A. - cored wire spheroidization stations
• Cime Crescenzi S.r.l. - electric furnaces and automatic press pouring furnaces
• Vibroprocess S.r.l. - vibrating conveyours, mobile charging cars, casting coolers, fluidized bed sand coolers, shake-outs
• O.M.A.R. S.r.l. – industrial air cleaning and dust extraction plants

and suppliers of materials for foundries, like cored wires and ferro-alloys from Slovenian producer TDR Legure d.o.o.

We mediate also in co-operation between Italian companies and Polish foundries, forging-shops and machine-shops.

We provide technical and commercial support, ensuring the highest quality of service.

Institute of Non-Ferrous Metals in Gliwice (IMN) is the main research and development centre of Polish non-ferrous metals industry. The offer :technical services and research works; development and modernisation of technologies in the field of ores treatment, metallurgy, processing of non - ferrous metals and alloys, waste utilisation, metal recovery, chemical sources of electricity;innovative materials; spectrometric reference materials for metals and alloys; modern flotation machines;refining equipment for aluminium

KRATOS POLSKA Sp. z o.o. specializes in manufacturing and trading of a variety of materials for the foundry industry. The company was founded in 2006, success on the market thanks to constant care of the highest quality products and services. Unique recipes of our products, the ability to adapt to customer necessity gives us a significant position on the market. The effect is achieved also through the development of continuous modernization and upgrading technological base.

Cooperation with regular partners enables us to improve the products, to fully meet them expectations.

This exhibitor has the following co-exhibitors at his stand:

FOUNDRY ECOCER - Italy

Since 1992 the company PROMET CZECH s.r.o. is one of the leading suppliers of raw materials for foundries and steel mills in Central Europe.
 We supply
- Hematite, Nodular and Steelmaking Pig Iron of different chemical composition,
- Ferroalloys FeS, FeSi, FeMnHC, FeSiMn, FeMnLC, FeCrHC, FeCrLC,
- Noble alloys FeMo, FeV, FeTi, FeNb,
- Metals Fe, Ni, Cu, Pb,
- Iron and steel scrap

VPI Polska Sp. z o.o. supports the industrial companies in Poland in manufacturing innovative and reliable products.

We deliver cutting-edge systems and provide specialized services in the field of: manufacturing simulations, process planning, virtual prototyping and 3D printing. We are also the official distributor of companies like ESI Group, Prodways and IronCAD in Poland.

Our dedicated solutions for numerical simulation and 3D printing enable the industrial firms to develop virtual prototypes and to carry out precise simulations of manufacturing processes. The simulations also allow to illustrate how different external factors can influence those prototypes. To find out more visit us on  http://vpi-polska.pl/

Since 1992 the company PROMET CZECH s.r.o. is one of the leading suppliers of raw materials for foundries and steel mills in Central Europe.
 We supply
- Hematite, Nodular and Steelmaking Pig Iron of different chemical composition,
- Ferroalloys FeS, FeSi, FeMnHC, FeSiMn, FeMnLC, FeCrHC, FeCrLC,
- Noble alloys FeMo, FeV, FeTi, FeNb,
- Metals Fe, Ni, Cu, Pb,
- Iron and steel scrap